Categories
Table of Contents
< All topics
Print

Add Airport values

The threshold values can be altered to tailor for operations to specific airports. New values entered for an airport will always override the default values when in use. This feature is only accessible once default values have been successfully added.

Step 1: Open Add new airport

Open the Add new airport-window by clicking Add in the top right corner of the screen.

Step 2: Search for the airport

Search for the wanted airport in the search field using either airport name or airport ICAO- or IATA code. Select and click Next.

Step 3: Enter thresholds

Enter airport specific threshold values and click Next. If default is wanted, mark Use default thresholds.

NOTE: Use default threshold can only be used for a maximum of two airport types. If the settings are used, all values for the selected airport type will calculated as standard values.

Ref Name Description
1 Airport type The step indicates when the defaults values are to be used. In the case above, the entered default values will be applied to all airports being used as departure
2 Threshold category The weather phenomena in the forecast the values are applied to
3 Marginal value The safe end of the marginal area. This is displayed as the boundary between green and yellow
4 Closed value The critical end of the marginal area. This is displayed as the boundary between yellow and red
5 Use default thresholds Use the values from your default data set
6 Back Go back to the previous step.
7 Next/Complete Go to the next step. If on the last step, the button will indicate complete. This saves the settings and closes the window

Step 4: Complete the setup

When values for the last airport type have been entered, click Complete to exit and save the configuration.

Download quick guide